Efuturo Wallbox With Charging Cable Type 2, 3 Phase, Up To 22 Kw, 32 A, 400 V, Mode 3, With Rfid Access Control, Without Electric Meter

EAN Code: 117.7521 Manufacturer code: Categories:

The efuturo Wallbox is characterised by its compact design as a space-saving charging station for electric and hybrid vehicles. The integrated LED display facilitates operation of the Wallbox and provides information on charging status or possible error messages at a glance. The Wallbox equipment is protected by an RCD type B residual current circuit breaker and thus meets the highest safety standards. The high quality plastic housing is suitable for safe operation of the efuturo Wallbox in outdoor environments. The ergonomically shaped Type 2 charging plug and the high-quality, long-lasting cable with a 5 metre reach connect the Wallbox quickly and easily to your electric or hybrid vehicle. The integrated RFID card reader helps prevent unauthorised use of the Wallbox. Simply hold the provided RFID card next to the Wallbox. The charging process is activated only after this authentication has taken place and the Wallbox starts communicating with the vehicle. If you don't want to use the Wallbox, you can place the type 2 plug in the plug holder in a neat way to avoid damaging the plug by limescale etc. Turn your garage or customer parking into a personal charging station for your electric and hybrid vehicles with efuturo Wallbox. The optional column can also help you make the most of your Wallbox equipment. With the efuturo Wallbox, it is possible to significantly reduce charging time. While the charging cycle for a Renault Zoe from a household outlet (2.3 kW) takes about 25 hours, it takes about 16 hours for a 3.7 kW Wallbox and 4.5 hours for an 11 kW Wallbox. Charging is up to 10 times faster with a 22 kW Wallbox, with charging time reduced to about 2.5 hours. It should be mentioned here that our standard household sockets are not designed to support the amount of electricity needed to charge electric and hybrid vehicles. Although it is possible to charge vehicles with sockets, this should only be interpreted as an emergency solution. The simple structure of the efuturo Wallbox saves you from an unpleasant surprise when the electricity bill comes. Your electrician is extremely familiar with the installed components. The extremely expensive RCD type B residual current circuit breaker is already integrated in the efuturo Wallbox. It guarantees you the highest level of safety and the switch does not need to be installed by a specialist in the external control cabinet. Unfortunately, due to the very small dimensions of the enclosure, no electric meter can be integrated in our efuturo Wallbox 11 kW or 22 kW equipment. Thus, we provide an electricity meter. This can simply be mounted on a DIN rail in the control cabinet by an electrician and connected to the Wallbox. Electricity consumption can be read off the MID calibrated electricity meter. This allows you to monitor your electricity consumption. Hirers can use the MID calibrated electricity meter to bill beneficiaries based on the consumption of the load.

Description
IEC61851 compliant wall or column mountable charging station for electric and hybrid vehicles
With charging cable type 2 (IEC 62196-2)
Load capacity up to 22 kW/ 32 A (three-phase)/ 400 V
Mod 3
Residual current circuit breaker RCD type B
With overheating protection
Cable length 5 meters
RFID access control
Practical holder for type 2 plugs
T?V tested, CE and RoHS certified
Properties:
Colour: black
Loading mode: mod 3
Cable colour: black
efuturo model: efuturo wallbox with charging cable type 2, 3 phases, up to 22 kW, 32 A, 400 V, mode 3, with RFID access control, without electric meter
Access protection: with
Electric control: Nu
Voltage: 400 V DC
Protection class: IP 55
Protective equipment: RCD Type B
RFID: Yes
Standard: IEC 61851
Mounting possibilities: wall or column mounting
Communication: (IEC 61851): Mode 3
Cable shape: straight
Cable length in m: 5 meters
Extendable with a column: Yes
DC fault current detection: yes
Operating temperature: - 40? to + 45?C
Housing dimensions (WxHxD): 199 x 326 x 132 mm
Energy class A: max. 32 amps (3 phase)
Charging performance: up to 22 kW
Cable cross section mm?: 5* 6.0 mm? + 1* 0.5 mm?
Plug on vehicle side: Type 2
Certification: T?V, CE, RoHS
Connection cycles: up to 10,000
Additional information
Brand