Efuturo Wallbox With Charging Cable Type 2, 3 Phase, Up To 22 Kw, 32 A, 400 V, Mode 3, Without Rfid Access Control, Without Electric Meter

The Wallbox efuturo is characterized by its compact design as a space-saving charging station for electric and hybrid vehicles. The integrated LED display facilitates operation of the Wallbox and provides information on charging status or possible error messages at a glance. The Wallbox is protected by an RCD type B residual current circuit breaker and thus meets the highest safety standards. The high quality plastic housing is suitable for the safe operation of the efuturo Wallbox in the outdoor environment. The ergonomically shaped Type 2 charging plug and the high quality, long-lasting cable with a 5 meter long reach connects the Wallbox quickly and easily to your electric or hybrid vehicle. After a short communication between the Wallbox and the vehicle, the vehicle battery charging process can start without access control. If you don't want to use the Wallbox, you can place the type 2 plug in the Wallbox holder in a tidy way to avoid damage to the plug by limescale etc. Turn your garage or customer parking lot into a personal charging station for your electric and hybrid vehicles with the Wallbox. The optional column can also help you make the most of the Wallbox equipment. With the efuturo Wallbox, it is possible to significantly reduce charging time. while the charging cycle for a Renault Zoe at a household socket (2.3 kW) takes about 25 hours, it takes about 16 hours for a 3.7 kW Wallbox and 4.5 hours for an 11 kW Wallbox. charging is up to 10 times faster with a 22 kW Wallbox, with charging time reduced to about 2.5 hours. It should be mentioned here that our standard household sockets are not designed to handle the amount of electricity needed to charge electric and hybrid vehicles. Although it is possible to charge vehicles using the sockets, this should only be interpreted as an emergency solution. The simple structure of the efuturo Wallbox saves you from an unpleasant surprise when the bill comes from the electricity supplier. Your electrician is extremely familiar with the installed components. The extremely expensive RCD type B residual current circuit breaker is already integrated in the efuturo Wallbox. It guarantees you the highest level of safety and the circuit breaker does not have to be installed by a specialist in the external control cabinet. Unfortunately, due to the very small dimensions of the casing, no electric meter can be integrated in our efuturo Wallbox 11 kW or 22 kW. We therefore provide an electricity meter. This can simply be mounted on a DIN rail in the control cabinet by an electrician and connected to the Wallbox. The electricity consumption can be read from the MID calibrated electricity meter. This allows you to monitor your electricity consumption. Those who rent the equipment can use the MID calibrated electricity meter to bill the beneficiaries, based on the consumption related to the charging.