Efuturo Wallbox With Charging Cable Type 2, 1 Phase, Up To 7,4 Kw, 32 A, 230 V, Mode 3, With Rfid Access Control, With Electric Meter

The efuturo Wallbox is characterised by its compact design as a space-saving charging station for electric and hybrid vehicles. The integrated LED display facilitates operation of the Wallbox and provides information on charging status or possible error messages at a glance. The Wallbox equipment is protected by an RCD type B residual current circuit breaker and thus meets the highest safety standards. The high quality plastic housing is suitable for safe operation of the efuturo Wallbox in outdoor environments. The ergonomically shaped Type 2 charging plug and the high-quality, long-lasting cable with a 5 metre reach connect the Wallbox quickly and easily to your electric or hybrid vehicle. The integrated RFID card reader helps prevent unauthorised use of the Wallbox. Simply hold the provided RFID card next to the Wallbox. The charging process is activated only after this authentication has taken place and the Wallbox starts communicating with the vehicle. Electricity consumption can be read from the built-in electricity meter. This allows you to monitor your electricity consumption. Hirers can use the MID calibrated electricity meter to bill beneficiaries based on the consumption of the charge. If you don't want to use the Wallbox equipment, you can place the type 2 plug in the plug holder in a neat way to avoid damaging the plug by limescale etc. Turn your garage or customer parking into a personal fuelling station for your electric and hybrid vehicles with the efuturo Wallbox. The optional column can also help you make the most of your Wallbox equipment. With the efuturo Wallbox, it is possible to significantly reduce charging time. While the charging cycle for a Renault Zoe from a household outlet (2.3 kW) takes about 25 hours, it takes about 16 hours for a 3.7 kW Wallbox and 4.5 hours for an 11 kW Wallbox. Charging is up to 10 times faster with a 22 kW Wallbox, with charging time reduced to about 2.5 hours. It should be mentioned here that our standard household sockets are not designed to support the amount of electricity needed to charge electric and hybrid vehicles. Although it is possible to charge vehicles with sockets, this should only be interpreted as an emergency solution. The simple structure of the efuturo Wallbox saves you from an unpleasant surprise when the electricity bill comes. Your electrician is extremely familiar with the installed components. The extremely expensive RCD type B residual current circuit breaker is already integrated in the efuturo Wallbox. It guarantees you the highest level of safety and the switch does not need to be installed by a specialist in the external control cabinet.