Dpf & Gpf On Car Cleaner - Particulate Filter Cleaning Spray (Diesel & Gasoline) 500 Ml Wynn`S

Specially developed to allow to clean and restore the properties of particulate filters (diesel and gasoline engines) in a safe, fast and efficient way, without having to remove the filter. Properties : Removes blocked deposits from particle filters. No need to remove the particulate filter. Applications: Recommended for all diesel and gasoline particulate filters. Instructions: 1) Insert the applicator tube directly into the particulate filter through the metal pressure sensor line, temperature sensor or oxygen sensor. 2) Spray the DPF and GPF cleaner into the particulate filter until the container is empty. 3) Allow the product to soak for 15-30 minutes 4) Reinstall the pressure sensor line or temperature/oxygen sensor 5) Restart the engine and idle for 5 minutes, then rev the engine at 2,000-2,500 rpm for 5 minutes 6) If the air flow sensor has been disconnected reconnect it 7) Clear the error codes and reset the particulate filter data if necessary 8) Perform an extended road test Caution: H229 - Pressurized container: may explode if heated. H318 - Causes serious eye damage. P210 - Keep away from heat, hot surfaces, sparks, flames and other sources of ignition. No smoking P251 - Do not pierce or burn, even after use. P280 - Wear face protection, protective gloves, protective clothing P305+P351+P338+P310 - IF IN EYES: Rinse thoroughly with water for several minutes. Remove contact lenses if necessary and if this can be done easily. Continue rinsing. Immediately call a POISON CENTER/physician/... P410+P412 - Protect from sunlight. Do not expose to temperatures exceeding