Wynn's Cooling System Stop Leak - Radiator Leak Stop Solution is a product designed to stop small radiator and cooling system leaks with anti-corrosive properties. Properties: - Stops and prevents radiator, cooling system and heating system leaks; - Stops leaks in the bolt gasket; - Does not damage rubber hoses, gaskets and other system components; - Is compatible with all antifreeze and cooling agents, and OAT cooling agents, too (organic azide technology); - Is designed to avoid clogging of radiator passages and temperature sensors; - Increased protection against rust and corrosion; Applications: - for all water-based cooling systems of gasoline, diesel and LPG engines, when there are minor leaks; - can also be used as a preventive agent. Instructions for use: - if the cooling system is excessively dirty, it is recommended to clean it beforehand with Wynn's Cooling System Flush - Cooling System Flush Solution; - check the coolant level; - start the engine, turn the heat up to maximum; - shake the product well and pour the entire container into the cooling system through the radiator filler cap or through the expansion tank in the case of a fully enclosed radiator with through-flow system; - turn the system off and let the engine run for 5-10 minutes until the leak(s) are sealed; - if necessary, add antifreeze; - a 325 ml container is sufficient for 5 -12 liters. Contents: 325 ml
